HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0003 1905
There are virtual volumes
and non-virtual volumes in
the volumes specified to
compose a LUSE volume.
Select another volume.
E
6
0003 1906
The specified volume cannot
be set as a command device
because it is being used as
a virtual volume.
Select another volume.
E
6
0003 1910
The specified
volume
contains XP
Snapshot pairs.
Select another volume.
E
6
0003 1911
The specified volume
contains Pool-VOLs.
Select another volume.
E
6
0 0 0 3 1912
The specified volume is a
remote command device,
and therefore the command
device setting or the
command device security
setting cannot be set or
released.
Correct the settings, and
then retry the operation.
E
6
0003 1913
The setting cannot be made
because
the specified LDEV
is a remo
te command
device.
Check the setting.
E
6
0003
1914
The number of V-VOL(s)
has exceeded the maximum
number of V-VOL(s) that can
be set in a subsystem.
Correct the settings, and
then retry the operation.
E
6
0 0 0 3 1915
The specified LDEV number
is invalid. The LDEV number
of the CU group which is
not set in CHA cannot be
specified.
Correct the settings, and
then retry the operation.
E
6
0003 1916
You cannot set the volumes
in the same parity group
across multiple CU groups.
Corr
ect the settings, and
then
retry the operation.
E
6
0003 1917
The volume(s) in CLPR
cannot be set across
multiple CU groups.
Correct the settings, and
then retry the operation.
E
6
00 03 1919
The newly added LDEV has
not been formatted. The
LDEV remains blocked. If
you continue this operation,
theLDEVcannotbereferred
from the host. Be sure to
format the LDEV.
Check the blocked LDEV
and format the LD EV.
W
6
0003 2001
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
0003 2002
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
Remote Web Console error codes
41