HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0003 1353
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a
fatal damage to S-VOLs.
Please stop this operation.
If you want to continue this
operation, please remove
theS-VOLsfromtheRCU
port first .
Since the port you are trying
to set is for Fibre Continuous
Access, you need to delete
the S-VOL logical path
which is set to RCU Target,
and then set.
E
6
0003
135 4
You could not register the
WWN to the initiator or
external port.
To register the WWN,
change the attribute of the
specified port to Target or
RCU Target.
E
6
0003 1355
You could not change the
host mode of the host group
that you connected to the
initiatororexternalport.
To change
the host mod e,
change the attribute of the
specifie
dporttoTargetor
RCU Targ
et.
E
6
0003 1356
You could not add the host
group to the initiator or
external port.
To add the host group,
change the attribute of the
specified port to Target or
RCU Target.
E
6
0003 1357
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a
fatal damage to the S-VOLs.
Please stop this operation.
If you want to continue this
operation, please remove
theS-VOLsfromtheRCU
port first .
The specified Port is for Fibre
Continuous Access. Please
delete a logical path, and
then retry the operation.
E
6
0003 1358
Cache Residency Manager
ca
nnotbesettothespecified
vo
lume because the IO
S
uppression mode is set to
E
nable.
Disable the IO Suppression
mode of this volume, and
then retry t he operation, or
removethevolumefromthe
volumes to be set.
E
2
0003 1359
Cache Residency Manager
cannot be set for this volume
becauseitsCachemodeis
set to Disable.
Enable the Cache mode of
this volume, and then retry
the operation, or remove the
volume from the volumes to
be set.
E
2
0003 1360
A Cross-system Copy
volume cannot be defined
as a system LU.
Specify a volume that you
can define as a system LU,
and then retry the operation.
E
2
0 0 03 1361
No more user LUs can be
set, because the number of
user LU set tings has reached
the maximum.
Reduce the number of user
LU settings, and then retry
the operation.
E
2
0003 1362
TheLUSEvolumecannot
be configured because the
Cross-system Copy volumes
do not have the same I/O
suppression mode and the
same cache mode.
Check the attributes of the
Cross-system Copy volumes,
and then retry the operation.
E
2
0003
136 4
Theporttypeisincorrect.
Check the port type, and
then retry the operation.
W
5
Remote Web Console error codes
39