HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
9605 813 5
This logical volume is
already used as an S-VOL
for Continuous Access or
Business Copy.
Please check the logical
volume configuration, and
then retry the operation.
E5
9605 813 6
The command was rejected,
because the licensed
capacity was exceeded.
The currently licensed
capacity is insufficient.
To increase the licensed
capacity, buy a new license
key .
E5
9605 8138
The Reserved setting of the
specified vo
lume cannot
be release
d. If you want
to release
the Reserved
setting, p
lease call technical
support.
The Reserve
d setting of the
specified device cannot
be released. To release
the Reserved setting, call
technical suppor t.
E5
9605 813 9
The specified volume is a
P-VOL for Business Copy.
Please check the volume,
and then retry the operation.
E5
9605
8141
This logical volume cannot
be selected because it is
used as a reserve volume
for Auto LUN.
Please check the volume,
and then retry the operation.
E5
9605 8142
You can
notselectthislogical
volume
because it is used as
aConti
nuousAccessJournal
volum
e.
Please check the logical
volume, and then retry the
operation.
E5
9605 8150
You tried to set a retention
term to a logical volume
whose access attribute is not
Read Only or Protect.
Please check the logical
volume, and then retry the
operation.
E5
9605 8151
You cannot shorten the
retention term of the logical
volume. If you want to
shorten it, please call
technical suppor t.
You cannot shorten the
retention term of the logical
volume. To shorten it, call
technical suppor t.
E5
9605 8152
You
cannot set a retention
te
rm to any mainframe
vo
lumes.
Please specify an
open-systems volume.
E5
9605 8153
The specified retention term
exceeds the maximum.
Please correct the retention
term, and then retry the
operation.
E5
9605
8154
The retention term of the
logical volume has been
changed by RAID Manager.
Please check the retention
term of the logical volume,
and then retry the operation.
E5
9605 8155
You cannot change the
access attribute because a
retenti on term is set to the
specified logical volume.
To change the access
attribute of the logical
volume to Read/Write, call
technical suppor t.
E5
9605 815 6
You cannot change the
access attribute because
the expiration lock is set to
Enable.
Please set the expiration
lock to Disable, and then
change the access attribute.
E5
372
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes