HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0003 1186
In the linkage operation
including LUSE, the path is
specified to other than the
top.
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1187
You cannot expand the LU
because the host mode of
the group with paths which
are defined in the LU is
corresponding to online
LUSE.
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1188
An error occurred. If this
problem persists please call
technical suppor t.
If this problem persists
please call technical
support.
E
2
0003 1189
Failed to delete the specified
user LU because it is being
used by the NAS package.
To delete the specified user
LU, delete the file system
configured on the LU that is
set by this user LU.
Please delete a file system
configured on the user LU,
and then retry.
E
6
0003 1190
To define a path to the
volume from a NAS port or
an iSCSI port, the volume
must be read/write-enabled
and also usable as an S-VOL
(secondary volume).
Please correct settings and
then retry.
E
6
0003 1192
When a
path is defined from
an iS
CSI port to a volume,
the v
olume cannot be
confi
gured as a command
dev
ice. Also, paths cannot
be d
efined from iSCSI ports
to c
ommand devices.
Please correct the settings,
and then retry.
E
6
0003 1193
You cannot add paths to
Continuous Access/Business
Copy/Cross-system Copy
pair volumes.
Please correct the settings,
and then retry.
E
6
0003 1194
No information can be
changed about this external
port because the port has
an external volume.
Please correct the settings,
and then retry.
E
6
0003 1195
The specified volume(s) are
used as a command device.
Please correct the settings,
and then retry.
E
6
0003 1196
You cannot create a LUSE
volume by concatenating
LUs and Cross-system Copy
LUs.
Please correct the settings,
and then retry.
E
6
0003 1197
You cannot set high-speed
mode to a package
including an external
port.
Please correct the settings,
and then retry.
E
6
Remote Web Console error codes
37