HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
9505 55583
The specified port does not
belong to the selected CU
group.
Please specify the port that
belongs to the selected CU
group.
E5
9505 565 24
This function cannot be used
by the storage partition
administrator.
Select another window. If
you want to set this function,
please contact the storage
administrator.
E
3
Table 87 Error Codes — Part Code 9507
Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
9507 60 12
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists,
please call technical
support.
E
3
Table 88 Error Codes — Part Code 9510
Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
951 0 6516
R-VOLs exist on the RCU
port.
Please release the R-VOLs
that have been set.
W
5
951 0 7060
An error occurred during
processing. If this problem
persists, please call
technical suppor t.
If this problem persists,
please call technical support
E
2
951 0
7111
An error occurred during
processing. If this problem
persists, please call
technical suppor t.
If this problem persists,
please call technical support
E
2
951 0 8659
There is no Fibre-Channel
port.
Check the contents, and
retry .
i
5
951 0 9005
An error occurred. Check
the error code.
An error occurred during the
indicated operation. Refer
to the error code for each
operation in Preset list.
i
0
951 0 9060
Are you sure you want to
delete the selected row?
To continue processing,
select [OK]. To stop
processing, select [Cancel].
i
0
951 0 9320
Execute an I/O check?
If you want to per form an
I/O check, select [Yes]. If
you do not want to perform
an I/O check, select [No].
If you want to cancel the
changes, select [Cancel].
i
0
951 0 9321
The maximum number of
the Externals and the host
groups is respectively 128
and 256 per port group.
Please check the number of
the externals and the host
groups registered in the port
group.
i
0
Remote Web Console error codes
369