HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)
Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
8510
552 42
You cannot move the NAS
system LUs (command
device, failure information
storage, FailSafe, and
backup data) to other SLPRs.
Please change th e setting.
Please check the settings
and retry the operation.
W
0
8510 55 2 61
The concatenated par ity
group cannot be set across
multiple CLPRs. Please select
another parity group, and
then retry the operation.
Please select another parity
group, and then retry the
operation.
W
0
8510 55 2 6 2
The P arity
Group cannot be
migrated t
otheCLPRthat
you newly
created. Please
apply the
tentative settings
with no pa
rity groups to the
CLPR tha
tyouhavecreated,
and then
migrate the parity
group.
Please apply t he tentative
settings with no parity
groups to the CLPR that
you have created, and then
migrate the parity group.
W0
8510
5557 5
Some of the selected parity
groups cannot be migrated
to the other SLPR or CLPR
in the selected CU group.
Please change the settings.
Check the settings.
W
0
8510 55636
The CLPR that has some
parity groups cannot be
deleted. Migrate all p arity
groups in the CLPR to
another CLPR, and t hen
delete the CLPR.
Migrate all parity groups in
the CLPR to another CLPR,
and then delete the CLPR.
W
0
8510 57 001
The partition configuration
may contain some
inconsistent information.
To initialize partition
configuration, select the
Yes button.
To stop the operation, select
the N o button.
If you selected [Yes],
perform the operation after
yousetupaSLPRname
and other changes. If you
selected [No], restart the
operation. If this problem
persists, contact the system
management.
E
3
8510 59051
Some L Us are set across
the multiple SLPRs. If this
operation is performed,
the storage partition
administrator will lose
his function. Do you want to
continue the operation?
Please check the settings of
the LUN paths with the LUN
Manager window. If the
settings are correct, select
OK and then continue the
operation. If the settings are
incorrect, select Cancel.
i
0
8510 5905 2
Some LUSE volumes are set
across the multiple CLPRs.
Do you want to continue the
operation?
Please check the settings of
the LUSE volumes with the
Open Volume Management
window. If the settings are
correct, select OK and then
continue the operation. If
the settings are incorrect,
select Cancel.
i
0
8510 59067
Amaximumof256SSIDs
will be registered except for
the duplicate SSIDs.
Check the settings.
W
0
354
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes