HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
8505 5 5017
Thetotalofthevalues
registered as the maximum
number of users that can
connect to each SLPR
exceeds the value set as
the maximum number
of connections to the
subsystem.
Set the correct value for
the total of the maximum
allowable user connections,
and then retry the operation.
If this problem persists, call
technical suppor t.
E5
8505 5 5018
The number of SSIDs
exceedsthemaximumthat
can be registered.
Delete the SSIDs that a re
no longer necessary, and
then retry the op eration. If
this problem persists, call
technical suppor t.
E5
8505 5 5019
An invalid SSID was
detected.
Correct the SSID setting,
and then retry the operation.
If this problem persists, call
technical suppor t.
E5
8505 5 50 20
The same SSID is already
registered in a different
SLPR.
Assign a different SSID, and
then retry the op eration. If
this problem persists, call
technical suppor t.
E5
8505 5 50 21
The specified CU number is
invalid.
Specify the correct CU
number, and then retry the
operation. If this problem
persists, call technical
support.
E5
8505 5 50 2
2
An attempt has been made
to either register newly
aCLPRthatisalready
register ed, or delete a CLPR
that is not registered.
Corre
ct the C LPR settings,
and t
hen retry the operation.
If th
is problem persists, call
tech
nical support.
E5
8505 5 50 23
An attempt has been made
to either register newly
aSLPRthatisalready
registered, or delete a SLPR
that is not registered.
Correct the SLPR settings,
and then retry the operation.
If this problem persists, call
technical suppor t.
E5
8505
55024
Some parity groups are
already registered in a
different CLPR.
Specify a different parity
group, and then retry the
operation. If the same
problempersistsdespite
retrying, call technical
support.
E5
8505 55025
The incorrect settings of
parity group are contained.
Correct the settings of
parity group, and retry
the operation. If the same
problempersistsdespite
retrying, call technical
support.
E5
8505 5 50 26
The specified port name
(port number) is invalid.
Specify the correct port
name (por t number), and
then retry the op eration. If
this problem persists, call
technical suppor t.
E5
348
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes