HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
0003 1131
No more host groups can
be set, because the number
of host groups has reached
the maximum (254) tha t can
be set in a port.
No more host groups can
be set, because the number
of host groups has reached
the maximum (254) that can
be set in a port. Reduce the
number of host groups, and
then retry the operation.
E
6
0003 1132
Failed to set the WWN
because the number of
WWNs exceeds the
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1133
Failed to
set the host mode
because t
he number of
host mod
es exceeds the
maximum
that can be set in
aport.
The Configuration
informat
ion has been
already c
hanged.
Please ch
eck the settings
and request the setting of the
configur
ation information
again.
E
6
0003
113 4
Failed to set the path
because the number of
pathsexceedsthemaximum
that can be set in a port.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1135
An error occurred. If this
problem persists, please call
technical suppor t.
When PORT information
(Fibre Address/Fibre
Topology/Channel Speed)
is set, multiple change
instructions are set to the
same PORT. The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
E
2
0003 1136
An error occurred. If this
problem persists, please call
technical suppor t.
Wh
en CHA high-speed
mo
de is set, multiple change
i
nstructions are set to the
s
amePORT.Theerrordoes
n
ot occur normally because
i
tisguardedinthescreen.
Contact the program maker.
E
2
0003 1137
Failed to form a LUSE
volume because the number
ofLUSEvolumesexceedsthe
maximum that can be set in
adiskarraysubsystem.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1138
An error occurred. If this
problem persists, please call
technical suppor t.
An error occurred. If
this problem persists, call
technical suppor t.
E
2
34
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes