HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
8105 1132
Failed to set the WWN
because the number of
WWNs exceeds the
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1133
Failed to set the host mode
because the number of
hostmodesexceedsthe
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105
113 4
Failed to set the path
because the number of
pathsexceedsthemaximum
that can be set in a port.
The Configuration
informat
ion has been
already c
hanged.
Please ch
eck the settings
and request the setting of the
configur
ation information
again.
E
6
8105 1135
An error occurred. If this
problem persists, please call
technical suppor t.
When PORT information
(Fibre Address/Fibre
Topology/Channel Speed)
is set, multiple change
instructions are set to the
same PORT. The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
E
2
8105 1136
An error occurred. If this
problem persists, please call
technical suppor t.
When CHA high-speed
mode is set, multiple change
instructions are set to the
same PORT. The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
E
2
8105 1137
Failed to from a LUSE
volume because the number
ofLUSEvolumesexceedsthe
maximum that can be set in
adiskarraysubsystem.
The Configuration
in
formation has been
al
ready changed.
Pl
ease check the settings
and request the setting of the
c
onfiguration information
a
gain.
E
6
8105 1140
Nothing is set. Create a
setting and then execute it.
Please release the Port
Group setting.
W6
8105 1181
The specified path cannot be
added, because the volume
is used by a Continuous
Access pair.
Correct the specified
contents, and request again.
E
6
8105 1183
The port informati on is
inconsistent with PCB mode
information.
Please correct the port
information or the PCB
mode information.
W0
332
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes