HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)
Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
8105 10 68
The spec ified host group has
not been registered.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 110 8
When changing the
configuration of the
command device, you
cannot set the command
device to the following
volumes:
• Reserved volumes for
Auto LUN
• Just-in-Time volumes
• Volumes other than the
open-system volumes
(including unmounted
volumes)
Command device setting
is requested for Reserve
volume of Auto LUN/Just
in Time volume. Or it
is requested for volumes
other than open volumes
(including un-installed
volumes). The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
E
2
81 0 5 111 0
You can
not use following
characters for the na me:
"\/:,;*? <>|
You cannot use spaces
for the first and the last
characters in the name.
Remove the prohibited
characters from the
nickname.
W
5
8105
1111
An error occurred. If this
problem persists, please call
technical suppor t.
A nickname is not specified
when the configuration
change of LUN-Security is
requested. The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
E
2
81 0 5 1116
An error occurred. If this
problem persists, please call
technical suppor t.
You have not specified
the value when registering
WWN. Or zero is set as
the WWN value. The error
does not occur normally
because it is guarded in
the screen. Contact the
program maker.
E
2
8105 1123
C
ommand device security
c
annot be set to the specified
volume because the volume
is not a command device.
T
he Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
330
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes