HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
8105 1015
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU
and path at the same time.)
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1018
An error occurred. If this
problem persists, please call
technical suppor t.
The specified port does not
exist. Y ou have specified
a wrong port number. Or
the specified port type
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
8105 1022
An error occurred. If this
problem persists, please call
technical suppor t.
Host mode
is invalid. (The
specifie
dvalueisnotinthe
specific
ation). The error
does not
occur normally
becaus
eitisguardedin
the scr
een. Contact the
progr
am maker.
E
2
8105 1023
The specified fiber address
is wrong.
Correct the specified
content, and issue the
request again. (Currently,
Bad Value Send report in
Set Response.)
W
5
8105
1024
An error occurred. If this
problem persists, please call
technical suppor t.
Fibre topology information is
invalid. (The specified value
is not in the specification) .
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
E
2
81 05 1025
The specified LU path does
not exist.
The Configuration
in
formation has been
al
ready changed.
Pl
ease check the settings
and request the setting of the
c
onfiguration information
a
gain.
E
6
8105 1028
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
81 05 1029
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
328
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes