HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)
Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
8105 10 04
Multiple volumes are
specified to a single port,
group or LUN combination.
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1005
The following volumes
cannot be specified
when you change path
configurations:
• Volumes that do not exist
• Volumes other tha n top
LUs in expanded LUs
• Volumes reserved by
Auto LUN
• Volumes to which the Just
in Time Storage function
is applied
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 10 07
Failed to remove the path.
The specified path is the last
path of the volumes used for
Continuous Access, Business
Copy, Cr oss-system Copy,
Auto LUN, or XP Snapshot.
Check t
he setting.
E
6
8105 10 09
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1010
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
8105 1011
An error occurred. If this
problem persists, please call
technical suppor t.
Thevolumewhichlinksas
an expanded LU extend
over CU#. The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
E
2
8105 1012
LU path is set to a volume
which link s as an expanded
LU.
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1013
The emulation types of the
volumes combined into a
LUSE volume are not the
same.
The emulation type of a
volume which links as an
expanded LU is not the
same. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
Remote Web Console error codes
327