HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
7005 57102
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
7005 58000
The command has been
rejected because the
cascade request for creating
cascade pairs composed
of volumes belonging to
thesameconsistencygroup
was issued.
Select a different volume
or release the consistency
group set ting.
i
0
7005 5800 1
The Paircreate command
for creating the L2 pair has
been rejected because the
L1 pair is in PSUS(SP) status.
Wait until
the L1 pair status
changes to
PSUS, and then
retry the
operation.
i
0
7005 58002
The Q uick Restore command
has been rejected because
the specified pair is
composed of a normal
volume and a customized
volume (CV).
Quick restore operation
cannot be performed when
the pair is composed of
a normal volume and a
customiz ed volume (CV).
Select a different pair.
i
0
7005 58003
The command has been
rejected because a
Continuous Access pair
exists in the same subsystem
frame.
To c o ntinue the operation,
delete the Continuous
Access pair.
i
0
7005
58004
The c
ommand has been
reje
cted because the issued
req
uest is an operation that
can
not be performed with
avo
lume that can b e used
fr
om either the mainframe
or
open-system hosts.
The requested operation
cannot be performed.
Check the status of the
specified volume.
i
0
7 005 58 259
The Q uick Restore command
has been rejected, because
the specified pair is
composed of internal
and external volumes, and
also used as a Continuous
Access pair.
Stop using the specified pair
for Continuous Access, or
specify a different pair, and
then retry the operation.
i
0
7005 58260
The Reverse Copy or Quick
Restore command has been
rejected, because the P-VOL
is also used as the P-VOL of
a Continuous Access pair
whosestatusisnotSuspend.
Change the status of the
Continuous Access pair, and
then retry the operation.
i
0
7005 58261
The Reverse Copy or Quick
Restore command has been
rejected, because the P-VOL
is used as the S-VOL of
a Continuous Access pair
whosestatusisnotSuspend.
Change the status of the
Continuous Access pair, and
then retry the operation.
i
0
7005 58262
A pair cannot be created
because shared m emory
for differential tables is
insufficient.
Please add sufficient shared
memory to create a pair.
i
0
300
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes