HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
7005 8656
The secondary SSID
specified for the pairsplit-S
or pairsplit command is
invalid.
Check the contents, and
retry .
i
0
7005 8657
The Swap&Freeze option
cannot be specified,
because the mode is
invalid.
Check the setting you
specified in Option tab.
i
0
7005 8670
The number of volumes
composing the LUSE volume
specified as the P-VOL does
not match the number of
volumes composing the
LUSE volume specified as
the S-VOL.
Match the number of
volumes composing the
LUSE volume you intend
to specify as the P -VOL
and the number of volumes
composing the LUSE volume
you inten
d to specify as the
S-VOL, an
dthenretrythe
operati
on.
i
0
7005 8695
The specified MU number is
not less than or equal to 2.
Correct the MU number,
and then retry the operation.
i
0
7 005 8920
Because a L1 pair is not
PSUS, you cannot o perate
to L2.
Wa it until L1 pair becomes
PSUS status, and execute
the operation to L2 pair.
i
0
7005
552 64
The command was rejected,
because you tried to create
avolumepairformedwith
avolumetowhichVMAis
set by Data Retention and a
volume without VMA.
You can
not create a pair
using t
hese volumes.
To crea
te a pair by using a
volume
without VMA, you
need t
oonlyusevolumes
witho
ut VMA. To create a
pair b
yusingavolumewith
VMA,
you need to only use
volu
mes with VMA.
i
0
7005 5530 1
You cannot create the
pair, because the licensed
capacity of Data Retention
is insufficient.
Increase the licensed
capacity of Data Retention,
and retry the operation.
E
6
7 005 56301
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
7 005 56302
A
n error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
7005 56 303
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
7005
565 2 4
This function cannot be used
by the storage partition
administrator.
Select another window. To
setthisfunction,contactthe
storage a dministrator.
E
3
7005 5710 1
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
Remote Web Console error codes
299