HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
7 005 56 25
You cannot create another
pair, because the number of
pairs in the group exceeds
the maximum.
Please select the OK button.
i
0
7005 5626
The specified volume cannot
be used because it is
write-protected by Data
Retention.
Please select the OK button.
i
0
7005
5654
This operation has been
rejected, The specified
volume(s) are being used by
Cross-system Copy.
Specify other volume(s), or
release the Cross-system
Copy setting.
i
0
7005 5655
You cannot set a pair
because the number of LBA
is different for the specified
volumes.
Please select other volumes
which have the same
number of LBA.
i
0
7 005 5656
The specified volume(s) are
Cross-system Copy volumes
and cannot be used to
create a pair.
Specify the volume(s) that
are not Cross-system Copy
volume(s).
i
0
7005 582 1
This operation has been
rejected. The Data Retention
settingdoesnotallowthe
specifi
ed volume(s) to be
specifi
ed as S-VOL(s).
Change t
he Data Retention
setting so that the specified
volumes can be used as
S-VOLs.
i
0
7005 601 2
An error occurred during
SVP processing. If this
problem persists please call
technical suppor t.
If this problem persists, call
technical support.
E
2
7005 6023
The SVP i s busy. Please wait
for a while, and then retry
the operation.
Ifthesameproblem
persists despite retrying,
call technical support.
E
3
7 005 6502
Processing in progress.
Ple
ase wait for a while , and
the
n retry the o peration.
Wait for a while, and retry
the operation.
i
0
7005 6503
The target volume status is
being changed to SMPL.
Wait for a while, and retry
the operation.
i
0
7005 73 1 0
This error code is not
registered.
If this problem persists, call
technical support.
W
0
7005 8000
At
ime-out er ror occ ur red.
Ret
ry the operation. If
yo
u get the same message
ag
ain, reboot the computer.
If necessary, Please call
technical support.
E
4
7005 8001
A time-out error occurred.
Retry the operation. If
you get the same message
again, reboot the computer.
If necessary, Please call
technical support.
E
4
Remote Web Console error codes
289