HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
0003 1022
An error occurred. If this
problem persists, please call
technical suppor t.
Host mode is invalid. (The
specified value is not in the
specification). The error
does not occur normally
because it is guarded in
the screen. Contact the
program maker.
E
2
0003 1023
An error occurred. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
0003
1024
An error occurred. If this
problem persists, please call
technical suppor t.
Fibre topol
ogy information is
invalid. (The specified value
is not in the specification) .
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
E
2
0003 1025
The specified LU path does
not exist.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1027
The specified value of the
command device setting is
invalid. Check the setting.
The specified value of the
command device setting is
invalid. (The specified value
is not in the specification) .
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
E
2
0003 1028
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
The Configuration
inf
ormation has been
alr
eady changed.
Ple
asecheckthesettings
and request the setting of the
co
nfiguration information
ag
ain.
E
6
0003 1029
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
0003 1030
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
0003 1031
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
0003 1032
The specified extent is over
thesizewhichcanbe
specified.
Set the extent area within the
size which can be sp ecified,
and then retry the operation.
E
6
28
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes