HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
00 03 1011
An error occurred. If this
problem persists, please call
technical suppor t.
Thevolumewhichlinksas
an expanded LU extend
over CU#. The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
E
2
00 03 1012
LU path is set to a volume
which link s as an expanded
LU.
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
00 03 1013
The emula
tion types of the
volumes c
ombined into a
LUSE volu
me are not the
same.
The emulation type of a
volume which links as an
expanded LU is not the
same. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
00 03 1015
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU
and path a t the same time.)
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
00 03 1018
An error occurred. If this
problem persists, please call
technical suppor t.
The specified port does not
exist. You have specified
a wrong port number. Or
the specified port type
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
0003 1020
An error occurred. If this
problem persists, please call
technical suppor t.
LU
N is invalid. (The
sp
ecified value is not in the
s
pecification). The error
d
oes not occur normally
b
ecause it is guarded in
the screen. Contact the
program m aker.
E
2
0003 1021
An error occurred. If this
problem persists, please call
technical suppor t.
The specified volume
does not exist. (You
have specified wrong
CU#:LDEV#) Or the LDEV
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
Remote Web Console error codes
27