HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)
Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
651 0
514 4
Some of the entered values
are incorrect. Check the
values and then specify
correct values.
Check the values, and then
specify correct values.
W
0
651 0 730 1
An error occurred in client
logic.
Please call technical support.
E
2
651 0 7302
An error occurred in client
logic.
Please call t
echnical support.
E
2
651 0 7303
An error occurred in client
logic.
Please call technical support.
E
2
651 0
7440
An error occurred during
processing. If this problem
persists, please call
technical suppor t.
Ifthesameerroroccurs
despite retrying, call
technical suppor t.
E
2
651 0 810 1
The system cannot apply the
new confi guration. Do you
want to re
fresh?
Select the Refresh button,
and retry.
W
5
651 0 9006
Exchange the channel
cable connections after
confirmation of the port
type.
Check the port type,
and then change cable
connections.
W
5
6510 9009
Snapshot is complete. Select [OK].
i
0
651 0 9021
The P o
rt Setting process has
not co
mpleted. Do y ou want
to con
tinue for other ports?
To cont
inue processing,
select Yes. If the processing
finish
es, reconfigure the port
that i
snotinoperation.
W
5
651 0
9024
Are you sure you want to
exchange the specified
ports? Please confirm the
associated channel paths
are offline.
Please ensure that the
associated channel paths
are offline.
W
5
651 0 9025
Are you sure you want to
switch th e ports? If the
remote copy paths exist
on the ports, delete them
beforehand.
Please remove remote copy
paths associated with the
ports.
W
5
651 0 9026
Are you sure you want to
switch the ports?
Ifanyremotecopypaths
exist on the ports, delete
them beforehand.
Also, to avoid the switching
o
peration from being
reported as a failure,
confirm firstthatamessage
prompting you to change the
channel cable connections is
displayed, and then perform
the necessary changes.
To continue to change ports,
select [OK].
W
5
6510 9100 Do you want to exit?
To exit the window, select
OK.Ifnot,selectCancel.
i
0
651 0 910 1
Do you want to cancel?
To cancel the operation,
select OK.
i
0
268
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes