HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
6505 58685
Delta resync operation
failed because the specified
primary data volume
was not a data volume
of Continuous Access
Synchronous or TrueCopy
for Mainframe Synchronous,
or the pair status of the
primary data volume was
invalid.
Check the following of the
specified primary data
volume.
• ThevolumeisanM-VOL
of a synchronous pair
and the pair status is
PAIR or Duplex when
it is referenced from
the Continuous Access
window, the TrueCopy
for Mainframe window,
RAID Manager or
Business Continuity
Manager.
• The volume is an R-VOL
of a synchronous pair
and the pair status is
SSWS or Swapping
when it is referenced
from the RAID Manager
or Business Continuity
Manager.
w
0
6505 58 68 6
The specified operation
failed because the attribute
of the journal group of the
remote subsystem was not
restore.
Check the attribute of the
journal group of the remote
storage system.
W
0
6505 58 687
The status of the other mirror
of the Delta resync did not
change.
If the problem persists
despite retrying, call
technical support.
W
0
6505 58 688
Delta resync failed because
the specified primary data
volume was not ready for
Delta resync.
Check the status of the
specified primary data
volume.
W
0
6505 58689
The operation failed
because the status of
some mirrors in th e master
or restore journal group is
invalid. Check the status of
the mirrors in the specified
journal group.
Check the status of the
mirrors in the specified
journal group.
W
0
6505 58 6 90
The recovery to the status
ready for Delta resync
failed, because the status
of the specified primary
data volume was one of the
following:
• The primary data
volume is being copied;
correction copy or drive
copy is in progress.
• The primary data volume
is in correction access
status.
• The primary data volume
is blocked
• The primary data volume
is being maintained.
Check the status on the
primary data volume.
W
0
Remote Web Console error codes
261