HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Table4ErrorCodes—PartCode0003
Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
0003 1002
The specified volume cannot
be set as a command
device or a component of a
LUSE volume, because it is
being used as a Continuous
Access, Business Copy,
Cross-system Copy, Auto
LUN, or Snapshot volume.
Select another volume.
Select another volume.
E
6
0003 1003
You are try
ing to set multiple
paths to th
esamevolume
from one g
roup.
The Configuration
informatio
n has been
already ch
anged.
Please che
ck the settings
and request the setting of the
configura
tion information
again.
E
6
0003
1004
Multiple volumes are
specified to a single port,
group or LUN combination.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1005
The following volumes
cannot be specified
when you change path
configurations:
• Volumes that do not exist
• Volumes other than top
LUs in expanded LUs
• Volumes reserved by
Auto LUN
• Volumes to which the Just
in Time Storage function
is applied
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0
003
1
007
Fa
iled to remove the path.
Th
especified path is the last
p
ath of the volumes used for
C
ontinuous Access, Business
C
opy, Cross-system Copy,
Auto LUN, or XP Snapshot.
Check the setting.
E
6
0003 1009
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
00 03 1010
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
26
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes