HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
6505
58340
The specified volume cannot
be used as a journal volume
because the specified
volume is a LUSE volume.
Please check the specified
volume and specify a
non-LUSE volume.
W
0
6505
58341
The specified volume cannot
be used as a journal volume
because the specified
volume is an external
volume.
Please check the specified
volume and specify a
non-external volume.
W
0
6505
58342
The specified volume cannot
be used as a journal volume
because of a Data Retention
setting or a Volume Retention
setting.
Please check the setting
of the volum
eintheData
Retention
window or the
Volume Ret
ention window.
W
0
6505
58343
The specified volume cannot
be used as a journal volume
because of a Volume
Security setting.
Please check the setting of
the specified volume in the
Volume Security window.
W
0
6505
58344
The Add Pair (P aircreate)
operation failed because the
specified secondary data
volume is a LUSE volume.
Please check the specified
secondary data volume and
specify a non-LUSE volume.
W
0
6505
58345
The Add Pair (P aircreate)
operation failed due to one
of the following reasons:
• The IO suppression
mode of the specified
secondary data volume
is enabled.
• The micro program
vers
ion of t he secondary
sub
system does not
sup
port external
vol
umes.
Make su
re that the IO
suppre
ssion mode of the
specifi
ed secondary data
volum
eisenabledonthe
Exter
nal Storage window.
If the IO suppression
mode is disabled, check
the microcode version of
DKCMAIN of the secondary
storage system, and call
technical suppor t.
W
0
6505
58346
The Paircreate operation
failed because a Data
Retention VMA was set up
on the specified secondary
data volume.
From the Data Retention
window, check the settings
of the specified secondary
data volume.
W
0
6505
5834 7
The Add Pair (P aircreate)
operation failed because of
a Volume Security setting
on the specified secondary
data volume.
Please check the setting
of the specified secondary
data volume in the Volume
Security window.
W
0
6505
58348
The Paircreate operation
failed because a Data
Retention VMA was set up
on the specified primary
data volume.
From the Data Retention
window, check the settings
of the specified primary
data volume.
W
0
6505
58349
The Add Pair operation
failed because the specified
primary data volume had
aProtectattributesetby
Volume Retention .
From the Volume Retention
window, check the settings
of the specified primary
data volume.
W
0
250
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes