HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

ManualsBrandsHP ManualsSoftwareHP Remote Web Console XP

Part

Code

Error

Number

Error M essage

Recommended Ac tion

Severit y

Level

Failure

Level

6505 8915

Remote Web Console

attempted to change the

port t ype. However, this

attempt was rejected

because the same operation

wasinprogressfromahost.

Please check the status

of the port, and retry the

operation.

W

0

6505 89 2 2

The primary subsystem does

not support remote copy via

serial interface.

Check whether the primary

storage system supports

remote copy via serial

interface. Install the

microcode that supports

remote copy via serial

interface, or execute remote

copy via ﬁbre interface.

E

4

6505

8924

Logical paths are deﬁned

to the port on the remote

subsystem.

Please de

lete the logical

paths on the speciﬁed port

and retry the operation.

E

4

6505 8929

Invalid port type.

Please check the port type

of the speciﬁed port and

retry the operation.

W4

6505 8930

Logical paths are deﬁned

to the port on the remote

subsystem.

Please delete the logical

paths on the speciﬁed port

and retry the operation.

E

4

6505 8931

Logica

l paths are deﬁned

to the p

ort on the remote

subsy

stem.

Please delete the logical

paths

on the speciﬁed port

and re

try the op eration.

E

4

6505 893 2

The Paircreate (Add Pair)

operation failed because

the speciﬁed primary data

volume is the NAS system

volume.

Please check the

conﬁguration of the

speciﬁed primary data

volume.

W

0

6505

8934

The Add Pair (Paircreate)

operation failed because

the speciﬁed secondary

data volume was a NAS

system volume.

Check the conﬁguration

of the speciﬁed secondary

data volume.

W

0

6505 8935

The Add Pair (Paircreate)

operation failed because

the speciﬁed primary data

volume was a NAS volume.

Ch

eck the conﬁguration of

the speciﬁed primary data

volume.

W

0

6505 8936

The Paircreate (Add Pair)

operation failed. The

microprogram version of

the speciﬁed secondary

subsystemdoesnotsupport

Continuous Access with

NAS volumes.

Please check the microcode

version of the secondary

storage system.

W

0

6505

89 44

The speciﬁed secondary

data volume is unusable

because of the access

attribute changed by Data

Retention.

Please check the access

attribute of the speciﬁed

secondary data volume.

i

4

Remote Web Console error codes

237