HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
6505 7060
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Ifthesameerroroccurs
despite retrying, call
technical suppor t.
E
2
6505
7111
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Ifthesameerroroccurs
despite retrying, call
technical suppor t.
E
2
6505 7310
This error code is not
registered.
Ifthesameerroroccurs
despite retrying, call
technical suppor t.
E5
6505 8000
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Retry the operation. If
this problem persists, call
technical suppor t.
E
3
6505 8001
A communication time-out
error occurred in the
subsystem. Please wait for
a while, and then retry the
operation.
Please wait for a while, and
then retry the operation.
E
3
6505 8002
A communication time-out
error occurred in the
subsystem. Please wait for
a while, and then retry the
operation.
Please wait for a while, and
then retry the operation.
E
3
6505 8100
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Retry the operation. If
this problem persists, call
technical suppor t.
E
2
6505 8102
This function is not
supported.
Check the DKCMAIN
microcode version and the
SVP microcode version,
because these versions
might be mismatched.
E
3
65
05
87
00
Please retry operation. Retry the operation.
i
4
6505 8701
The logical path b etween
the local and the remote
subsystems is invalid.
Check the path status and
edit the path again.
i
4
6505 8702
The status of the primary
data volume is not valid.
Please refresh and check
the window. If possible,
retrytheoperationonthe
primary data volume.
i
4
6505 8703
The specified number of
pathsislessthanthe
minimum number of paths
in the DKC Option window.
Check the number of paths.
i
4
6505
8704
The specified number of
pathsislessthanthe
minimum number of paths
in the DKC Option window,
due to a communication
error between the local and
theremotesubsystems.
Please check the path status
in the DKC Status window,
and then restore the paths.
W4
228
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes