HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)
Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
6010 9 317
The destination volume
of the specified volume
pair may contain some
inconsistency because
volume copy is not
completed yet. Full volume
initialization is required
before re-using it.
The same as the message.
W
0
6010 9 318
As a result of this operation,
you will not be able to
re-start ER ASE R-VOL
operation.
To delete the p air, even
though you cannot
re-execute the R-VOL
deletion, select OK. If
not, select Cancel.
W
0
6010 9 322
Snapshot has failed.
Select [O
K]. Then contact
maintena
nce staff.
E
4
60 1 0 9323
Snapshot has been
canceled.
Select [OK].
i
0
6010
9324
The specified operation is
prohibited while the script is
running.
Try again after the script
ends.
W
0
6010 9 325
The scr
ipt is terminated
forcib
ly.
Select [OK].
i
0
60 1 0 9327
The monitoring time is over,
but the history file is not fully
updated yet.
Please select the Refresh
button to update the history
file. If this problem persists,
call technical support.
W
0
601 0 9332
This operation is not applied
yet.
Select the OK button, and
then continue the operation.
i
0
6010 9 337
The r
equested operation has
star
ted.
The r
equested operation
has s
tarted. Please select
the O
Kbuttontoclosethe
dia
log.
i
0
6010 9 360
The specified value exceeds
the range. Alternatively,
the relationship between
the specified values is not
appropriate.
Check the specified values
and retry the operation.
W
5
6010 5 5035
If you plan to create a pair
with the specified LUSE
volumes, a DK C path is
required.
Select Add RCU command,
and then register a DKC
path.
W4
6010 5 5202
T
he subsystem specified
b
y Controller ID is not
a
vailable for the particular
CU selected from the tree.
F
ind the CUs that can be
u
sed by the stor age system
specified by Controller ID.
W
0
6010 5 5203
There are no initiator ports
that can be used by the
subsystem specified by
Controller ID.
Find the ports that can be
used by the storage system
specified by Controller ID,
and set them as initiator
ports.
W
0
6010
55204
The M-VOL or R-VOL is n ot
supported by the specified
RCU.
Check the settings of the
specified RCU, M-VOL and
R-VOL.
W
0
Remote Web Console error codes
225