HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
6010 9 302
There are no RCP ports.
Set the port to RCP before
registering RCU. Moreover,
setupthecorrectrangeof
CU numbers to which the
RCP port is applied.
W
0
6010 9 303
There are no valid volumes.
There is no valid volume.
Check the device emulation
and the definition of the
SCSI path (for Continuous
Access).
W
0
6010 9 304
WARNING: Group or
C/T is specified for Delete
Range. Confirm all pairs in
thegrouparesynchronized.
If some vo
lumes are not
synchron
ized, full volume
initial
izations are required
before r
e-using them.
Thesameasthemessage
W0
6010 9 305
There are no initiator ports.
Set the port to Initiator
before registering RCU.
W0
6010 9 306
The Continuous Access
function is not installed in
this controller. You cannot
create pairs.
There is no Continuous
Access license. Set the
license.
W
0
6010 9 307
You specified the same
volumes m ore than once.
The duplicate occurrences
were excluded.
Since the same volume
where multiple paths are
defined was selected,
the overlapped one was
eliminated. Press the OK
button and continue.
W
0
6010 9308
Yousetthesamepathmore
than once. The d uplicate
paths are excluded.
Since there were overlapped
paths in the added paths,
the overlapped ones were
eliminated. Press the OK
button and continue.
W0
6010 9 309
All paths which you set have
already been registere d.
This operation will terminate
because there is no path
which can be added.
Sincealltheaddedpaths
overlapped, the operation
of adding paths cannot be
executed. Press the OK
button and continue.
W
0
6010 9310
YousetthesameSSIDmore
than once. Duplicate SSIDs
are excluded.
Since there were overlapped
SSIDs in the added SSIDs,
the overlapped ones were
eliminated. Press the OK
button and continue.
W
0
6010 9 311
All SSIDs which you set have
already been registere d.
This operation will terminate
because there is no SSID
which can be added.
Sincealltheadded
SSIDs are overlapped,
the operation of adding
SSIDs cannot be executed.
Press the OK button and
continue.
W0
6010 9 316
Through this operation,
M-VOL status will be
changed to Simplex mode
even if the M-VOL is online
to the host.
Thesameasthemessage.
W
0
224
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes