HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

ManualsBrandsHP ManualsSoftwareHP Remote Web Console XP

Part

Code

Error

Number

Error M essage

Recomme n ded Ac tio n

Severity

Level

Failure

Level

6005

89 43

The speciﬁed volume

or other volume(s) of

thesamegroupinthe

RCU is being changed to

Simplex/Suspend status.

Retry the operation a few

minutes later.

Refresh the window a few

minutes later and check

the status of the speciﬁed

volume and other volume(s)

of the same group in the

RCU. If it is possible to

perform operations on

the volume(s) , retry the

operation.

i

4

6005

89 44

The speciﬁed R-VOL is not

available according to

the at tribute of the R-VOL

changed by D ata Retention.

Check the status of the

speciﬁed R-VOL.

i

4

6005

89 45

At least one of the following

is invalid:

• M-VOL parameters (CU

number, Port, GID, LUN)

• SSID or CU number of

the RCU

• R-VOL parameters (Port,

GID, LUN)

Verify whether the

parameters of M-VOL,

for example, CU number ,

port, GID and LUN, are

supported with the RCU

microcode program version

or not. V

erify whether the

SSID and

CU number of

RCU and

the parameters of

R-VOL,

for example, Port,

GID an

dLUN,arecorrect

or not

. And then, retry the

opera

tion with the correct

para

meters.

W4

6005 8947

Theexternalvolumethat

is mapped to an internal

volume is connected to the

port.

Release the setting of the

external volume, and retry

the operation.

i

4

6005 8948

The speciﬁ ed por t is

receiving I/O requests.

Stop I/O o perations, and

retry .

i

4

6005

89 49

An i

nternal error occurred.

Ple

ase call technical support.

E

4

6005 8950

An internal error occurred. Please call technical support.

E

4

6005 8972

Failed to create a pair,

because the speciﬁed

M-VOL is used for

Cross-system Copy.

Check the status of the

speciﬁed M-VOL.

i

4

6005 8973

Failed to create a pair,

because the speciﬁed R-VOL

is used for Cross-system

Copy.

Check the status of the

speciﬁed R-VOL.

i

4

6005

8974

Failed to create a pair,

because the speciﬁed

M-VOL is path-deﬁned from

the iSCSI port.

Check the status of the

speciﬁed M-VOL.

i

4

6005 8975

Failed to create a pair,

because the speciﬁed R-VOL

is path -deﬁned from the

iSCSI port.

Check the status of the

speciﬁed R-VOL.

i

4

6005 8976

A pair cannot be created,

because the speciﬁed

M-VOL is an external

volume.

Check the status of the

speciﬁed M-VOL.

i

4

212

HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes