HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
6005 88 72
This version does not
support multi CT Groups in
the MCU.
This microcode version does
not support multiple CT
Groups in the MCU. Verify
the status and retry the
operation.
i
4
6005 88 73
Continuous Access
Asynchronous function is
not installed in the specified
MCU.
Install the Continuous Access
Asynchronous function in
the MCU, and then retry the
operation.
i
4
6005
8874
Invalid Timer Type option.
Specify Local or None
for the timer type on the
Continuous Access window,
and then retry the operation.
i
4
6005 88 75
At least one asynchronous
pair is active in this group.
Renew and check the
Continuous Access screen.
E
4
6005 88 76
Ther e are no PCBs which
corresponds to the specified
port type.
Confirm the PCB t ype and
try the operation again with
a correct parameter .
i
4
6005 88 7 7
An internal error occurred. Please call technical support.
E
4
6005 88 78 CT Group is not active.
Verify that the CT group is
active in the MCU.
E
4
6005 88 79
At least one asynchronous
pair is active in this group.
Verify that there are no
active asynchronous pairs
in this group, and retry the
operation.
i
4
6005 8880
Please wait. Retry Delete
Groupoperationinafew
minutes.
Retry the operation after
the pair status has been
changed to simplex.
i
4
6005 8881
An internal error occurred. Please call technical support.
E
4
6005 8882
Asynchronous Option
(Current Pending Update
Data Rate) cannot be
changed, because the CT
group is active.
Delete all of the Continuous
Access CT gr oups, and then
retry the operation.
i
4
6005 8883
An i
nternal error occurred.
Ple
ase call technical support.
E
4
6005
8884
An internal error occurred. Please call technical support.
E
4
6005 8885
An internal error occurred. Please call technical support.
E
4
600
5
888
6
An internal error occurred. Please call technical support.
E
4
6005 8887
An internal error occurred. Please call technical support.
E
4
6005 8888
An internal error occurred. Please call technical support.
E
4
6005 8889
Th
especified port is not
eq
uipped.
Refresh the screen, and
retry. If nothing changes,
call technical support.
E
4
6005 8890
The specified port is being
initialized.
Please wait until the
initialization of the port
ends, and retry the
operation.
E
4
Remote Web Console error codes
207