HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
6005 8713
The port group already
exists on the specified port.
Theporttypecouldnot
be changed because the
port group was set in the
specified package. Delete
the group setting, and then
change the port type.
E
4
6005
87 14
An internal error occurred. Please call technical support.
E
4
6005 8715
Invalid number of paths.
The specified
number of
paths is not
within the
acceptable
path range of
0to4. Pleaseverifythe
number of paths and retry
the operation.
E
4
6005 8716
Specified por t is not RCP.
Check the configuration
of the LCP/RCP, and then
either specify the correct
port or change the port to
RCP.
E
4
6005 8717
Invalid Destination Link
Address.
The specified logical
address must be either 00
or 01. Check the logical
address and retry the
operation.
E
4
6005 8718
The specified logical path
already exists.
The spe
cified link address
and por
t are already in use.
Check
all existing logical
path addresses, and specify
another link address or RCP
port.
i
4
6005 8719
Invalid RCU serial number,
SSID, Link Address or
Controller ID.
Check the serial number,
SSID, link address and
controller ID of the RCU,
and set the correct value.
Then retry the operation.
Ifthesameerroroccurs,
contact technical support.
E
4
6005 8720
Too many RCUs. (Four RCUs
are the maximum)
A maximum of four RCUs
are permitted, and that
many already exist.
i
4
6005 872 1
Path not completely
established.
Check the path connections
between the MCU and the
RCU, and then retry the
operation.
E
4
6005 8722
Failure during path creation.
Check the path connections
between the MCU and the
RCU, and then retry the
operation.
E
4
6005 8723
The Edit Path operation
was rejected because the
specified path is the last
path of some Continuous
Access pairs.
Add another path, o r delete
all pairs on the RCU. Then
retry the operation.
i
4
190
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes