HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)
Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
6005 8705
The path could not
be deleted due to a
communication error
between MCU and RCU.
Either a communication error
occurred between the MCU
and the RCU, or the C HA
has become blocked. Please
call technical support.
W4
6005 8706
Parameter specified
by Continuous Access
operation is invalid.
A parameter specified by
the Continuous Access
operation is invalid. For
example, the R-VOL that
is specified could already
be in use as the R-VOL of
another Continuous Access
pair.
i
4
6005 8707
Paramete
rspecifi ed by
Data Migr
ation operation is
invalid
.
A paramete
rspecified by
the data mi
gration operation
is invali
d. (For example,
the R-VOL
that is specified
may alrea
dy be in use as
the R-VO
Lofanotherpair).
Please c
heck the status of
the volu
mes and retry the
operat
ion.
i
4
6005 8708
The pair status of the R-VOL
is not valid.
Check the pair status for
Continuous Access. If the
requested R-VOL is in a
permissible status, retry the
operation.
i
4
6005 8709
Continuous Access
operation was rejected.
All channel adapters are
not active for Continuous
Access. Please call technical
support.
E
4
600
5
87 1
0
The pair status of the
specified volume is not
valid.
The p
airstatusdoesnot
per
mit this operation. Verify
the
pair status, and if the
ope
ration is permitted retry.
i
4
6005 8711
Parameter specified
by Continuous Access
operation for expansion
volume is not valid.
Check the port number,
GID, and LUN of the RCU.
i
4
6005 8712
The op eration was rejected
due to a FREEZE state.
1. If this was a path
operation retry after
the problem has been
fixed.
2. If this was a pair
operation, retry after
the paths have been
recovered. Two means
of recovering paths are
as follow:
a. Execute ESTPATH
from the host
console, or
b. First delete the
path(s) from the
SVP, and then
re-add them.
E
4
Remote Web Console error codes
189