HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
5205 8 1 02
This function is not
supported.
Retry the same operation
several times. If the same
error occurs, call technical
support.
E
6
5205 8525
An internal logic error
occurred.
Check the volume, or quit
using Continuous Access.
i
0
5205 8526
An internal l
ogic error
occurred.
Check the vol
ume, or quit
using Conti
nuous Access.
i
0
5205 8528
An internal logic error
occurred.
Check the volume, or quit
using Continuous Access.
i
0
5205 8529
An internal logic error
occurred.
Check the volume, or quit
using Continuous Access.
i
0
5205 8530
An internal logic error
occurred.
Check the volume, or quit
using Continuous Access.
i
0
5205 853 1
An internal logic error
occurred.
Check the volume, or quit
using Continuous Access.
i
0
5205 867 1
A pair cannot be created
because the volumes differ
in the number of LBAs.
Please try creating the pair
again by using the volumes
with same number of LBAs.
i
0
5205 5 5059
The spec
ified source volume
is a Con
tinuous Access
volume
or a TrueCopy for
Mainfr
ame volume. The
specifi
ed target volume is an
external volume. Therefore,
the specified volumes cannot
be used for migration.
Select other volumes.
E
6
5205 55060
The specified volume
migration plan cannot be
executed because a volume
on which VMA of Data
Retention is set is paired
with a volume on which
VMA is not set.
Please confirm the settings
of the spec ified volumes.
W
6
5205 55201
If the migration source
volume is a normal volume,
aCVSvolumeofthesame
capacity as the migration
source volume cannot be
specified as the migration
target volume. If the
migration source volume is
aCVSvolume,anormal
volume of the same capa city
as the migration source
volume cannot be specified
as the migration target
volume.
Check the setting of the
migration source volume
and the migration target
volume.
E
6
5205 55207
The auto m igration plans
cannot be created because
None is specified in
Sampling Term.
Specify the parameters other
than None in Sampling
Term.
E5
Remote Web Console error codes
175