HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
301 0 55595
Only up to 16,384 LDEVs
can be set when you apply
the In stall CV setting once.
You can only set another %s
LDEVs because the number
ofLDEVsthatcanbesetin
aVDEVismorethanthe
number of LDEVs that can
be set by Install CV setting
one time.
Apply the Install CV setting,
and then retry the Install CV
setting.
W
5
301 0 55635
Neither the format
processing nor the
shreddingprocessingis
executed.
Select [OK].
W
5
3010 5 5637
The proces
sing for adding
or deleti
ng LD EV remains
interrup
ted. Please call
technica
l support and
request
to execute the
interru
pted processing and
end the p
rocessing normally
from the SVP.
Request technical support
to execute the interrupted
processing and complete it
successfully from the SVP.
W0
3010 5 5643
Failed to create the
shredding result file in
the previous shredding
operation. Retr y the
shredding operation.
Retry the shredding
operation.
If this problem persists,
please call technical
support.
W
5
3010 58209
An error occurred in format
processing or in Write to
Contr ol Blocks pr ocessing.
Please confirm whether the
external volume is zero
formattedwhenanerror
occurs in Write to Control
Blocks processing. Execute
zero format processing
when the external volume is
not zero formatted.
Please retry the operation
if the error occurred in
the format processing. If
this problem persists, call
technical suppor t.
i
0
3010 5 9 023
Are you sure you want to
change the status of the
s
pecified volumes?
(
To select a LUSE volume,
select the top LDEV.)
I
fyouwanttochangethe
status, select [O K]. If not,
select [Cancel].
i
0
3010
59024
The specified volume will be
formatted. Are you sure you
want to continue?
(To select a LUSE volume,
select the top LDEV.)
Ifyouwanttoformatthe
volume, select [OK]. If not,
select [Cancel].
i
0
3010 5 9118
Please use this function only
for zero formatted volumes.
Do you want to continue this
operation?
Select [OK] to continue
Write to Control Blocks
processing, or select
[Cancel] to stop the
processing.
i
5
148
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes