HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
3010
5054
Executeoneofthefollowing
before deleting the LDEV:
However, LDEV cannot
be deleted for the Remote
Command D evice.
• delete paths associated
with the LDEV.
• release the LUSE volume.
• release the reserved
volume of Auto LUN.
• remove Volume Security
settings from the volume.
• set access attr ibute of
the LDEV to Read/Write
• remove Pool settings
from the volume.
• remove JNL settings from
the volume.
• remove Extent settings
from the volume.
Check the content of the
operation.
W
5
3010 5055
Thereisnovolumetobe
initialized.
A volume cannot be
initialized when it is:
• Definedwithapathor
paths,
• Used as a LUSE volume,
• Reserved for Auto LUN,
• Paired with another
volume,
• Set as a command
device,
• Used for Volume
Secur ity, or
• Not read/write-enabled,
or
• Used as a Pool volume,
• Used as a JNL volume,
• Used as a Remote
Command Device
volume,
• Used as an Extent De vice
volume.
Check the content of the
operation.
W
5
3010 5056
Select LDEVs after canceling
the automatically selected
LDEVs.
Check the content of the
operation.
W
5
3010 5057
There are not enough LDEVs.
Check the content of the
operation.
W
5
3010 5058
Volume Initialize cannot
be performed because the
number of volumes that can
be created in the parity
group is exceeded.
Reduce the number of
volumes in the parity gr oup,
and then retry.
W
5
Remote Web Console error codes
145