HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
3005 58576
A communication time-out
error occurred in the
subsystem. Please wait for
a while, and then retry the
operation.
If this problem persists, call
technical suppor t.
E
3
3005 58706
An error occurred during
SVP processing.
If this problem persists,
please call technical
support.
If this problem persists, call
technical suppor t.
E
2
Table 34 Error Codes — Part Code 3010
Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
3010
1046
The number of Cache
Residency Manager settings
has exceeded the maximum
number of available Cache
Residency M anager areas.
Reduce the
number of
Cache Resi
dency Manager
settings,
and then retry the
operatio
n.
W
5
3010 5010
The specified SSID falls out
of range. Please specify a
validSSID,andthenretry
the operation.
Correct the specified
content, and retry.
W
5
3010 5011
Specify a value that is one
cylinder or more .
Correct the specified
content, and retry.
W
5
3010 5012
Set a val
ue that is 35MB
(7 2 ,00
0blocks)ormore.
Correct
the set value, and
then re
try the operation.
W
5
3010 5030
There are no LDEVs which
can b e initialized. Specify
LDEVs which are not Auto
LUN reserved volumes.
Correct the specified
content, and retry.
W
5
3010 5031
No LDEV is specified.
Correct the specified
content, and retry.
W
5
3010
5040
The specified value exceeds
the maximum.
W
5
3010 5050
Failed to perform the Volume
to Space operation because
the spe cified LDEV is the last
LDEV in the VDEV.
Check the content of the
operation.
W
5
3010 5051
Free space is required for
Install CV to operate.
Check the content of the
operation.
W
5
3010 505 2
The specified LDEV is
already in use.
Check the content of the
operation.
W
5
3010 5053
The specified SSID is already
in use.
Check the content of the
operation.
W
5
14 4
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes