HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
3005
58471
The shared memory for the
V-VOL management area is
insufficient.
Please install additional
shared memory for the
V-VOL m anagement area.
E
6
3005 5847 2
Operation of the pool has
failed.
Pool cannot be registered
when:
• V- VOL management
area is not initialized.
• V- VOL management
area is not installed.
• there is no sp ace left in
the V-VOL management
area.
• the pool is blocked.
• the state of shared
memory is abnormal.
Pool cannot be deleted
when:
• V- VOL management
area is not initialized.
• V- VOL management
area is not installed.
• XP Snapshot pair still
remains in the pool.
• P-VOL still remains in the
pool.
• the pool is blocked.
The threshold of pool cannot
be changed when:
• the threshold is set below
the usage rate of the
pool.
When the pool cannot be
registered, do the following:
• check the installation
status of the V-VOL
management area, when
the V-VOL management
area is not initialized.
• check the installation
status of the V-VOL
management area, when
the V-VOL management
area is not installed.
• check the free area of
the V-VOL management
area, when there is no
free area in the V-VOL
management area.
• check the status of the
pool when the pool is
blocked.
• Status of the shared
memory by the
Maintenance window
of SVP, when the state
of shared memory is
abnormal.
When the pool cannot be
deleted, do the following:
• check the installation
status of the V-VOL
management area, when
the V-VOL management
area is not initialized.
• check the installation
status of the V-VOL
management area, when
the V-VOL management
area is not installed.
• d elete the XP Sn apshot
pair if it still remains in
the pool.
• d elete the XP Sn apshot
pair if P-VOL still remains
in the pool.
• check the status of the
pool when the pool is
blocked.
When the pool threshold
cannot be changed, do the
following:
• refresh the window and
check the usage rate of
the pool.
E
6
142
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes