HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
1010 5068
Theportcannotbechanged
becauseitisusedforaNAS
environment.
Please follow the correct
operation procedure.
W
5
1010 5069
It cannot be changed
because of a NAS system.
Please follow the correct
operation procedure.
W
5
1010 5070
LUN or CU:LDEV
is
repeated.
Please follow the correct
operation procedure.
W
5
1010 5071
Path setup cannot be
performed because the
copy source is not an
open-system volume.
Please follow the correct
operation procedure.
W
5
1010 5099
The specified LUN is the last
path to the command
device. Release the
command device.
Check the content of the
operation.
W
5
1010 5822
You enter
ed the wrong item.
Correct the settings, and
then retry.
W
5
1010 5823
It is not updated.
Correct the settings, and
then retry.
W
5
1010 5867
The specified volume cannot
be manipulated because it is
reserved by RAID Manager.
Releasethereservesetting
of the volume, and then retry
the operation.
W
5
1010 6509
The host mode is invalid.
Please specify a correct host
mode.
Correct the mode of the
target group.
W0
1010 7060
An error occurr ed in the
client logic.
Please call technical support.
E
2
1010 9012
LUN security for the
specified command device
will be released. D o you
want to continue?
Please select [OK] for
continuing processing.
Please select [Cancel] if you
want to stop.
i
0
1010 9013
The LUN will be specified as
acommanddevice.Doyou
want to continue?
i
0
1010
9014
TheLUNwillnotbespecified
as a command device. Do
you want to continue?
i
0
1010 9015
The port of a PCB in High
Speed mode/MIX mode is
selected. When changing
the parameter of topology
or the parameter of host
speed, the change will be
applied to the PCB in High
Speed mode/MIX mode.
Are you sure you want to
continue this operation?
To change the parameter in
High-Speed mode/MIX
mode, select [OK].
Otherwise, select [Cancel].
i
0
1010 9017
LUN security will be applied
to the spec ified command
device. Do you want to
continue?
Please select [OK] for
continuing processing.
Please select [Cancel] if you
want to stop.
i
0
126
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes