HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
1005 2084
The subsystem status is
invalid. Please call technical
support.
Check the DKC status and
the current status of the
configuration setting. If
necessary, re-execute the
setting operation.
E
2
1005 2097
The host specified by the
WWN is performing I/O
operations.
Please stop executing I/Os,
and then retry the operation.
E
6
1005 2098
The operation cannot be
performed, because the SVP
microprogram version does
not match the DKCMAIN
(subsystem) microprogram
version.
Please call
technical support,
when the sam
eproblem
persists.
E
6
1005 2099
The operation cannot be
performed, because an
inoperative MP exists.
Wait for a while, and
then retry the op eration. If
the same problem persists.
Please call technical support.
E
6
1005 2100
An error occurred while
connecting to the subsystem.
The configuration may be
inconsistent. Please select
[All Refresh] and refresh the
configuration.
Select [All Refresh] and
refresh the configuration.
E
2
1005 2170
The Ex
tended Copy
Manag
er is running, but
the host I/O operations
may not have stopped yet.
Please terminate the host
I/O operations.
Pleas
e stop the host I/O.
W
6
1005 2500
You cannot define paths
from NAS or iSCSI ports
to volumes that don't have
Read/Write attribute.
Please correct settings and
then retry.
E
6
1005 2501
The volume cannot be
configured as a command
device because the volume
does not have Read/Write
attribute.
Please correct settings, and
then retry.
E
6
1005 2502
The LUs cannot be combined
or released because
the volumes don't have
Read/Write attribute.
Please correct settings, and
then retry.
E
6
1005 2503
The LUs cannot be combined
or released because
the volumes don't have
Read/Write attribute.
Please correct settings, and
then retry.
E
6
1005 2504
No settings ca n be made
because of a volume
reserved for RAID Manager.
Releasethereservesetting
of the volume, and then retry
the operation.
W
5
1005 300 2
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical suppor t.
E
2
12 0
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes