HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

ManualsBrandsHP ManualsSoftwareHP Remote Web Console XP

Part

Code

Error

Number

Error M essage

Recommended Ac tion

Severit y

Level

Failure

Level

1005 1352

Logical paths remain on

the Fibre-MCU port. This

operation m ay cause a fatal

damage to the logical paths.

Please stop this operation.

If you want to continue this

operation, please remove

the logical paths from the

MCU port ﬁrst.

Since the port you are trying

to set is for Fibre Continuous

Access, you need to delete

the logical path, and then

set.

E

6

1005 1353

S-VOLs remain on the

Fibre-RCU port. This

operation may cause a

fatal damage to S-VOLs.

Please stop this operation.

If you want to continue this

operation, please remove

theS-VOLsfromtheRCU

port ﬁrst .

Since the port you are trying

to set is for Fibre Continuous

Access, you need to delete

the S-VOL logical path

which is set to RCU Target,

and then set.

E

6

1005 1354

You could not register the

WWN to the initiator or

external port.

To register the WWN,

change

the a ttribute of the

speciﬁed port to Target or

RCU Target.

E

6

1005 1355

You could not change the

host mode of the host group

that you connected to the

initiatororexternalport.

To change the host mode,

change the attribute of the

speciﬁed port to Target or

RCU Target.

E

6

1005 1356

You could not add the host

group to the initiator or

external port.

To add the host group,

change the attribute of the

speciﬁed port to Target or

RCU Target.

E

6

1005 1357

S-

VOLs remain on the

Fi

bre-RCU port. This

op

eration may cause a

f

atal damage to the S-VOLs.

P

lease stop this operation.

I

f you want to continue this

operation, please remove

theS-VOLsfromtheRCU

port ﬁrst .

The speciﬁed Port is for Fibre

Continuous Access. Please

delete a logical path, and

then retry the operation.

E

6

1005 1360

A Cross-system Copy

volume cannot be deﬁned

as a system LU.

Specify a volume that you

can deﬁne as a system LU,

and then retry the operation.

E

2

10 0 5 13 61

No more user LUs can be

set, because the number of

user LU set tings has reached

the maximum.

Reduce the number of user

LU settings, and then retry

the operation.

E

2

1005 1362

TheLUSEvolumecannot

be conﬁgured because the

Cross-system Copy volumes

do not have the same I/O

suppression mode and the

same cache mode.

Check the attributes of the

Cross-system Copy volumes,

and then retry the operation.

E

2

1005 1363

You cannot add paths to

journal volumes.

Correct the settings, and

then retry the operation.

E

6

1005

136 4

Theporttypeisincorrect.

Check the port type, and

then retry the operation.

W

5

Remote Web Console error codes

117