HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recomme n ded Ac tio n
Severity
Level
Failure
Level
1 0 0 5 1116
An error occurred. If this
problem persists, please call
technical suppor t.
You have not specified
the value when registering
WWN. Or zero is set as
the WWN value. The error
does not occur normally
because it is guarded in
the screen. Contact the
program maker.
E
2
1005 1123
Command device security
cannot be set to the specified
volume because the volume
is not a command device.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1125
There are no host groups
wher e the WWN will be
registered.
The Configu
ration
information has been
already changed.
Please check the settings
and requ
est the setting of the
configuration information
again.
E
6
1005 1126
A volume set as a command
device cannot be used as
acomponentofaLUSE
volume. Select another
volume.
Correct the specified
contents, and request again.
E
6
1005 1127
An error occurred. If this
problem persists, please call
technical suppor t.
CHA high-speed mode is
specified to unmounted
CHA. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
10
05
11
28
An error occurred. If this
problem persists, please call
technical suppor t.
Channel speed change
is requested, but Fibre
PCB does not support it.
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
E
2
1005 1130
You cannot specify the
default nickname when
setting the nickname of a
host group or a host.
Correct the specified
contents, and request again.
E
6
1005 1131
No more host groups can
be set, because the number
of host groups has reached
the maximum (254) tha t can
be set in a port.
No more host groups can
be set, because the number
of host groups has reached
the maximum (254) that can
be set in a port. Reduce the
number of host groups, and
then retry the operation.
E
6
112
HP StorageWorks XP Remote Web Console for Storage System M essages and Error Codes