HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
1005 1015
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU
and path a t the same time.)
The Configuration
information has been
already chang ed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1018
An error occurred. If this
problem persists, please call
technical suppor t.
The specified port does not
exist. You have specified
a wrong port number. Or
the specified port type
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
1005 1020
An error occurred. If this
problem persists, please call
technical suppor t.
LUN is inv
alid. (The
specifie
d value is not in the
specific
ation). The error
does not
occur normally
becaus
eitisguardedin
the scr
een. Contact the
progr
am maker.
E
2
1005 1021
An error occurred. If this
problem persists, please call
technical suppor t.
The specified volume
does not exist. (You
have specified wrong
CU#:LDEV#) Or the LDEV
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
Contact the program maker.
E
2
1005 1022
An error occurred. If this
problem persists, please call
technical suppor t.
Host mode is invalid. (The
specified value is not in the
specification). The error
does not occur normally
because it is guarded in
the screen. Contact the
program m aker.
E
2
1005 1023
An error occurred. If this
problem persists, please call
technical suppor t.
I
f this problem persists, call
technical support.
E
2
1005
1024
An error occurred. If this
problem persists, please call
technical suppor t.
Fibre topology information is
invalid. (The specified value
is not in the specification).
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
E
2
Remote Web Console error codes
109