HP StorageWorks Performance Control XP user guide (T1605-96007, October 2007)

Performance Control XP user guide 81
B Limitations for storage partition administrators
If the user type of your user ID is storage partition administrator, you can use only Auto LUN XP and the
Export Tool from the Auto LUN XP programs. In this case, you cannot use Auto LUN XP or Performance
Control XP.
Also, when logging in as a storage partition administrator, the available functions of Auto LUN XP and the
Export Tool are limited. This appendix explains these limitations of Auto LUN XP and the Export Tool.
Limitations of Auto LUN XP
The Auto LUN XP functions that are limited when you logged in as a storage partition administrator are
shown in Table 28. For the Auto LUN XP pane displayed when logging in as a storage partition
administrator, see Figure 29.
Table 28 Limitations for storage partition administrators (Auto LUN XP)
Pane Limited function
Physical tab in the Auto LUN XP pane • The tree and list display only information in the SLPR (storage
management logical partition) allocated to the user ID.
• The Auto LUN XP button is not displayed (see Figure 29). Therefore,
the user cannot start Auto LUN XP.
LDEV tab in the Auto LUN XP pane The tree and list display only information in the SLPR allocated to the user
ID.
Port-LUN tab in the Auto LUN XP pane • The tree and list display only information in the SLPR allocated to the
user ID.
• The SPM button is not displayed (see Figure 29). Therefore, the user
cannot start Performance Control XP.
WWN tab in the Auto LUN XP pane The WWN tab is not displayed (see Figure 29). The user cannot view
traffics between host bus adapters and ports.
CA Monitor pane
TCz Monitor pane
CA Journal Monitor pane
URz Monitor pane
These panes are not displayed (see Figure 29). The user cannot view
information about remote copy operations performed by Continuous
Access XP, TrueCopy for z/OS, Continuous Access XP Journal, and
Universal Replicator for z/OS.
Monitoring Options pane The Monitoring Options pane is not displayed (see Figure 29). The user
cannot start or stop monitoring, or change the gathering interval.