HP StorageWorks Performance Control XP user guide (T1605-96007, October 2007)

52 Performance Control Export Tool
those in Table 19, the Export Tool does not retry the processing. In this case, you must quit the
command prompt and run the Export Tool again. However, you can change the maximum number of
retries using the retry subcommand. For detailed information, see ”The retry subcommand” on
page 56.
If the error persists, contact your HP account support representative.
If you specify the nocompress operand for the option subcommand, the Export Tool saves files in
CSV format instead of ZIP format (for detailed information, see ”The option subcommand” on
page 72). Note that, when files are saved in CSV format instead of ZIP format, the file-saving process
would take longer and the resulting files would be larger.
Files the Export Tool saves are often very large. The total file size for all files can be as large as
approximately 2 GB. For this reason, the export process might take a long time (see Table 20). To
export statistics spanning a long time period, HP recommends using the Export Tool more than one
time, rather than using the tool only one time to export the whole statistics. For example, to export
statistics spanning 24 hours, you could run the Export Tool eight times; each time the Export Tool runs,
the tool should export statistics spanning three hours.
Table 19 Errors for which the Export Tool retries processing
Error message ID Cause of error
0001 4001 An error occurred.
0001 5400 Since the server is busy, monitoring data cannot be obtained.
0001 5508 An administrator is changing a system environment file.
0002 2016 Array is refreshing, or user-specified settings are being registered.
0002 5510 Array is refreshing, or another user is changing configuration.
0002 6502 Now processing.
0002 9000 Another user has lock.
0003 2016 SNMP or SVP has lock.
0003 2033 Server is not ready yet, or internal processing is being executed.
0003 3006 An error occurred.
0405 8003 Array status is invalid.
5205 2003 An internal process is being executed, or maintenance is in progress.
5205 2033 Server is now gathering the latest data.
5305 2033 Server is now gathering the latest data.
5305 8002 Array status is invalid.
Table 20 Estimate examples of time required for exporting files
Operand for
the group
subcommand
Estimated time Remarks
Port 5 minutes Assumes the Export Tool should save statistics about 128 ports within a
24-hour period.
PortWWN 5 minutes Assumes the Export Tool should save statistics about 128 ports within a
24-hour period.
PPCG 5 minutes Assumes:
There are eight SPM groups, and eight WWNs are registered on each
SPM group.
There is a WWN that is not registered on any SPM group.
The Export Tool should save statistics about SPM groups and WWNs
described above within a 24-hour period.