HP StorageWorks Performance Control XP user guide (T1605-96007, October 2007)

28 Using Performance Control XP
a. Right-click the selected PFC group, and select Change Upper Limit. The Change Upper Limit dialog
box appears.
Figure 15 Change Upper Limit dialog box
b. To assign an upper limit to the I/O rate, enter the upper limit value, select IOPS from the list, and
click OK.
To assign an upper limit to the transfer rate, enter the upper limit value, select 100KB/s from the list,
and click OK.
5. In the Performance Control pane, click Apply. Settings are applied to the array.
Renaming PFC groups
1. Start Performance Control XP (”Starting Performance Control XP” on page 19). The Performance Control
pane appears.
2. Click WWN.
3. In the lower-left tree view, right-click a PFC group ( ).
4. Select Change Name. The Change PFC Group Name dialog box appears.
Figure 16 Change PFC Group Name dialog box
5. Enter the new name, and click OK.
6. In the Performance Control pane, click Apply. Settings are applied to the array.
Deleting PFC groups
1. Start Performance Control XP (”Starting Performance Control XP” on page 19). The Performance Control
pane appears.
2. Click WWN.
3. In the lower-left tree view, right-click a PFC group ( ).
4. Select Delete.
5. In the Performance Control pane, click Apply. Settings in the pane are applied to the array.