HP StorageWorks LUN Configuration and Security Manager XP User Guide for the XP1024/XP128 (T1614-96005, March 2006)

40 LUN Manager for the XP1024/XP128
Starting Port Operations
1. Click LUN Manager in the left pane. The LUN Manager pane appears.
2. Click the Port tab. The Port pane appears.
Figure 21 Port pane
Port tab
The Port tab includes the package tree, port table, and change port mode box.
Package tree
The Package tree lists all Fibre Channel and iSCSI channel adapter (CHA) packages. When you
right-click a CHA package, you can choose standard mode, high-speed mode, or high-speed (2 port)
mode.
NOTE: High-speed (2 port) mode is available only if the XP disk array has firmware version 21.06.22 or
later installed.
The following icons are used to indicate status:
Port table
The Port table displays information about the ports in the selected CHA packages. The information in this
table differs depending on the type of channel adapter package selected in the tree.
Table 12 Channel adapter package icons for Port operations
Icon Status
A short-wave CHA package in standard mode (Fibre Channel)
or
A short-wave iSCSI CHA package
A long-wave CHA package in standard mode
A short-wave CHA package in high-speed or high-speed (2 port) mode
A long-wave CHA package in high-speed or high-speed (2 port) mode