HP StorageWorks External Storage XP user guide (December 2005)

56 External Storage XP for the XP10000/XP12000
disk array’s port in the Device Tree. Select and right-click the volume you want to display, and select VMA
Information.
Figure 34 VMA Information pane
The VMA Information pane displays the following information:
• Vendor
External disk array vendor.
• Product
External disk array product name.
• LUN
LU number of the external volume.
• Attribute
Select from the following access attributes:
• Read/Write: Both read and write operations can be performed on the volume.
• Read Only: Only read operations can be performed on the volume.
• Protect: You cannot access the volume. Neither read nor write operations can be performed.
• S-Vol
Select Enable or Disable to indicate whether or not the volume can be specified as an S-VOL.
• Reserved
Use this column to indicate whether RAID Manager and Command View XP or XP Remote Web
Console can be used to make LU path settings and command device settings.
•Hyphen (-): RAID Manager and Command View XP or XP Remote Web Console can be used to
make the LU path settings and command device settings.
• RAID Manager: RAID Manager can be used to make LU path settings and command device
settings, but Command View XP or XP Remote Web Console cannot be used.
• Retention Term
Period (in days) when you cannot change the Attribute field to Read/Write.
• Mode
Mode the RAID Manager user assigns to the logical volume.
• Zer: Zero Read Cap mode is assigned to the logical volume.
• Inv: Invisible mode is assigned to the logical volume.
• Zer/Inv: Zero Read Cap and Invisible mode are assigned to the logical volume.
•Hyphen (-): The RAID Manager user has not assigned a mode to the logical volume.