HP StorageWorks External Storage XP user guide (December 2005)

External Storage XP user guide 37
Discovery WWN: World Wide Name of a recognized external array port.
Serial: Serial number of the storage product.
Product: Storage product name.
Vendor: Storage vendor name.
WWN of external disk array
port
LUN: LU number in the external disk array.
Characteristic: ID number of external LU.
Device: Device name of external LU.
Ex-Dev. info.: Information about external disk array. When the external disk array
is an SATA/FATA drive, “*” is displayed.
VMA: Information about the VMA setting of LUN Security XP Extension. When
VMA is set for the volume, * appears.
Capacity: Capacity of the external LU.
Characteristic2: External volume’s extended identifying information. This
information is used for identifying logical volumes in the EVA disk array. For more
information, see ”Description for Characteristic2” on page 86.
Table 5 Possible values of LU status
LU status Description
Normal LU status is normal.
Unknown LU status has yet to be ascertained.
Blockade I/O traffic to the LU is not permitted.
Warning FC path or paths have an abnormal status. Check the status of the paths.
Checking External Storage XP is verifying configuration information defined for FC paths.
Cache Destage External Storage XP is writing all data in the XP10000/XP12000 cache memory to
the LU.
Disconnect Connection to external disk array or external LU was interrupted intentionally using
the Disconnect Subsystem or Disconnect Volume command.
Table 6 Possible values of LDEV status
LDEV status Description
Normal LDEV status is normal.
Unknown LDEV status has yet to be ascertained.
Blockade I/O traffic to the LDEV is not permitted.
Warning External volumes have abnormal status.
Format Volume is in the process of being formatted.
Table 4 Items appearing in the Device List (continued)
Item selected in Device Tree Information displayed in Device List