HP StorageWorks Continuous Access XP user guide for the XP10000/XP12000 (December 2005)

Continuous Access XP user guide for the XP10000/XP12000 49
NOTE: To change the number of items that can be displayed without scrolling, change the font size.
Figure 21 Volume list (partial view)
• Volume icon: Status of volumes. Table 17 shows the icons.
• Port, G-ID, and LUN: Port number, LU host group number and name, and LU number (LUN).
NOTE: If # is added to the end of an LDEV number, such as 00:3C#, the LDEV is an external
volume. For details about external volumes, see the HP StorageWorks External Storage XP User
Guide.
• Status: See ”Continuous Access XP volume pair status” on page 25 for further information about
Continuous Access XP pair status. Table 18 shows the icons.
Table 17 Volume icons for Continuous Access XP operations
Icon Explanation
SMPL
P-VOL
S-VOL
Table 18 Status icons for Continuous Access XP operations
Icon Explanation
SMPL. Volume is not currently assigned to a Continuous Access XP pair. When the paircreate
operation starts the initial copy, the volume status changes to COPY.
COPY.
Continuous Access XP initial copy operation is in progress. Data on the pair is not fully
identical. When the initial copy is complete, the status changes to PAIR.
PAIR. Volume is currently assigned to a Continuous Access XP pair, and the pair is 100%
synchronized. All updates from the host to the P-VOL are duplicated at the S-VOL.
PSUE. Pair was suspended by the MCU or RCU due to an error condition. Volumes in this pair are not
synchronized.
PSUS. Pair was split by the user (pairsplit-r), or pair was deleted by the user from the RCU (pairsplit-S).
Volumes in this pair are not synchronized.
PDUB.
Continuous Access XP LUSE pair is in the COPY or PAIR state, but at least one LDEV pair within
the
Continuous Access XP LUSE pair is in the SMPL or PSUE state.
Suspending.
Continuous Access XP Asynchronous only. Pair is not synchronized, and is in transition
from the PAIR or COPY state to the PSUS/PSUE state.
Deleting.
Continuous Access XP Asynchronous only. Pair is not synchronized, and is in transition from
the PAIR, COPY, or PSUS/PSUE state to the SMPL state.