HP StorageWorks Continuous Access XP user guide for the XP10000/XP12000 (December 2005)

Continuous Access XP user guide for the XP10000/XP12000 47
Table 16 shows the Continuous Access XP functions of each tab. To apply settings on the Continuous
Access XP function tabs, click Apply.
Table 16 Continuous Access XP functions
Tab Menu Command Description
Pair Operation Pairdisplay
Displays CU information, path information, pair status, and
settings information about
Continuous Access XP pairs.
Monitoring LDEV status is not supported.
Paircreate >
Synchronous
Sets new
Continuous Access XP Synchronous pairs.
Paircreate >
Asynchronous
Sets new Continuous Access XP Asynchronous pairs.
Pairsplit - S
Deletes Continuous Access XP pairs that are already set.
Pairsplit - r
Splits or suspends
Continuous Access XP pairs.
Pairresync
Resumes
Continuous Access XP pairs that are split or
suspended. Resuming in LDEVs is not supported.
Change Pair Option Modifies pair options that were originally set (Fence level or Error
level).
RCU Operation RCU Status
Displays RCU status and
Continuous Access XP port numbers
that are already set.
RCU Operation >
Add RCU
Registers the RCU at the remote disk array. RCU controls the
S-VOL of the
Continuous Access XP volume pair.
RCU Operation >
Delete RCU
Deletes RCUs that are already registered.
RCU Operation >
Change RCU Option
Modifies options for RCUs that are already registered.
Edit SSIS(s) & Path(s) >
Add Path
Adds paths to RCUs.
Edit SSIS(s) & Path(s) >
Delete Path
Deletes paths to RCUs.
Edit SSIS(s) & Path(s) >
Add SSID
Adds SSIDs of RCUs that are connected to the MCU.
Edit SSIS(s) & Path(s) >
Delete SSID
Deletes SSIDs of RCUs that are already connected to the MCU.
Port Changes port types for the connected disk array.
Asynchronous
Operation
CT Group Operation >
CT Group Status
Displays information about consistency groups that are already
registered.
CT Group Operation >
Add CT Group
Assigns CUs to consistency groups.
CT Group Operation >
CT Group Option
Modifies settings for consistency groups that are already
assigned.
CT Group Operation >
Delete CT Group
Deletes consistency groups that are already assigned.
Async Option Sets and modifies asynchronous copy options.
Usage Monitor — Collects and displays I/O statistics using the Remote Copy
Monitoring function.