HP StorageWorks Continuous Access XP Journal user guide (T1778-96001, June 2006)

Continuous Access XP Journal user guide 71
Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations)” on
page 72.
Figure 30 Recovering from primary site disasters
Changing to 3DC multi-target configurations after recovering from primary site failures
If you follow the instructions in ”Recovering from primary site failures” on page 70 and the system does
not change to a 3DC cascading configuration, you can change the system to a 3DC multi-target
configuration after removing failures from the primary site and other locations. In the resulting 3DC
multi-target configuration, the former Continuous Access XP secondary volume is the primary volume.
To change the system to a 3DC multi-target configuration:
1. Use RAID Manager XP to delete the former Continuous Access XP Journal pair.