HP StorageWorks Continuous Access XP Journal user guide (December 2005)

Continuous Access XP Journal user guide 67
Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations)” on
page 68.
Figure 30 Recovering from disaster at primary sites
Changing to 3DC multi-target configurations after recovering from primary site failures
If you follow the instructions in ”Recovering from primary site failures” on page 66 and the system does not
change to a 3DC cascading configuration, you can change the system to a 3DC multi-target configuration
after removing failures from the primary site and other locations. In the resulting 3DC multi-target
configuration, the former Continuous Access XP secondary volume is the primary volume.
To change the system to a 3DC multi-target configuration:
1. Use RAID Manager to delete the former Continuous Access XP Journal pair.