HP StorageWorks Continuous Access XP Journal user guide (December 2005)

130 Continuous Access XP Journal
NOTE: You cannot save the history file while operation history is being updated. Save operation
history in a text file after operation history is updated.
• List: Displays operation history for data volume pairs in the connected disk array.
• Operation Date/Time: Date and time when the operation was completed.
• Copy Time: Time taken for the operation. Displayed only for Paircreate Complete and Pairresync
Complete operations.
• JNL Group: Journal group number.
• Mirror ID:Mirror ID.
• VOL: Volume manipulated during the operation. This volume is located in the local disk array. The
number to the left of the colon (:) is the CU number. The number to the right of the colon is the LDEV
number.
• Paired VOL: Volume paired with the manipulated volume. This volume is located in the remote disk
array. The number to the left of the colon (:) is the CU number. The number to the right of the colon
is the LDEV number.
• Operation: Operation performed.
• Pair definition: Data volume pair was defined.
• Paircreate Start: Creation of data volume pair was started.
• Paircreate Complete: Creation of data volume pair was finished.
• Pairresync Start: Restoring data volume pair was started.
• Pairresync Complete: Restoring data volume pair was finished.
• Pairsplit-r Start: Splitting (Suspending) data volume pair was started.
• Pairsplit-r Complete: Splitting (Suspending) data volume pair was finished.
• Pairsplit-r(Failure): Data volume pair was split (suspended) because of a failure.
• Pairsplit-S Start: Deleting data volume pair was started.
• Pairsplit-S Complete: Deleting data volume pair was finished.
• Status Change by MCU(SMPL to COPY): Status of data volume pair was changed from SMPL to
COPY because of an operation from the primary disk array.
• Status Change by MCU(SMPL to PAIR): Status of data volume pair was changed from SMPL to
PAIR because of an operation from the primary disk array.
• Status Change by MCU(COPY to PAIR): Status of data volume pair was changed from COPY to
PAIR because of an operation from the primary disk array.
• Status Change by MCU(COPY to PSUS/PSUE): Status of data volume pair was changed from
COPY to PSUS or PSUE because of an operation from the primary disk array.
• Status Change by MCU(PAIR to PSUS/PSUE): Status of data volume pair was changed from PAIR
to PSUS or PSUE because of an operation from the primary disk array.
• Status Change by MCU(PAIR to SMPL): Status of data volume pair was changed from PAIR to
SMPL because of an operation from the primary disk array.
• Status Change by MCU(COPY to SMPL): Status of data volume pair was changed from COPY to
SMPL because of an operation from the primary disk array.
• Status Change by MCU(PSUS/PSUE to SMPL): Status of data volume pair was changed from
PSUS or PSUE to SMPL because of an operation from the primary disk array.
• Status Change by MCU(PSUS/PSUE to COPY): Status of data volume pair was changed from
PSUS or PSUE to COPY because of an operation from the primary disk array.
• Status Change by RCU(Pairsplit-r Start): Status of data volume pair was changed because an
operation for splitting a pair started at the secondary disk array.
• Status Change by RCU(Pairsplit-r Complete): Status of data volume pair was changed because
an operation for splitting a pair finished at the secondary disk array.